Mr. Gasket 62 – Carburetor Studs

Description

Mr. Gasket 62 – Carburetor Studs

Carburetor Stud – 5/16-18 and 5/16-24 in Thread – 2.5 in Long – Hex Nuts – Steel – Zinc Oxide – Set of 4

Carburetor Studs; Extra Long; 2.5 in.; Coarse Thread On One End And Fine Thread On The Other; 4 Studs w/Nuts And Washers;

This is a high quality long stud that will be needed if you add a carburetor spacer under your carb. This is usually something that you will forget up until you set that carb on and the bolts are too short. So pick up a set today and have them ready. These zinc-plated studs help prevent stripped out threads in your aluminum intake manifold, hold the gasket in place and guide the carburetor on. Includes 4 studs, nuts & washers. Extra long 2-1/2 inch length.

• Fits Up To 1-3/4 in. Spacers
• Made Of Zinc Coated Steel
• 5/16-24 And 5/16×16 Threads
• 4 ea. Per Set

Brand: Mr. GasketCategory: Air and Fuel DeliveryColor: SilverEmission Code: 5Finish: Zinc coatedMaterial: Steelpart type: Carburetor Throttle StudProduct Type: Carburetor StudsSub Category: Hardware, Fasteners and FittingsWarning: California Proposition 65Warranty: Manufacturer’s Limited 90 Day WarrantyWeight: 0.25