B&M 80506 – Thread End Cable

Description

B&M 80506 – Thread End Cable

Shifter Cable – 6 ft Long – 2-1/2 in Stroke – Threaded Ends – Steel Cable – Plastic Liner – Red – B&M Shifters Pre 1981 – Each

Performance Shifter Cable; 6 ft.; Threaded Ends; For B&M Shifters Built Prior To 1981;

This 6-ft performance replacement shifter cable is threaded at both ends of the cable for vintage B&M Shifters built before 1981. It’s properly clearanced to reduce backlash and has a .250-inch ‘long-lay’ (stiffer, less prone to kinking) outer jacket. The cable features 10-32 threaded ends for both the shifter and at the transmission side of the cable. It has a 2.50-inch stroke and comes pre-lubed ready to bolt on and operate your classic B&M shifter. Note: Does not fit B&M shifters manufactured after 1981, or B&M Unimatic shifters.

• Properly Clearance
• Reduces Backlash
• 0.250 in. Outer Diameter
• Long Lay Outer Jacket
• 600 lbs. Pull Strength
• Several Lengths Available

Brand: B&MCable End (Shifter): 10-32 ThreadedCable End (Transmission): 10-32 ThreadedCable Material: Long lay thermoplastic jacket and spiral wound steel strand inner cableCable Stroke (in): 2.5Category: TransmissionColor: RedDiameter (in): 0.25Emission Code: 5End 1 Type: 10-32 ThreadedEnd 2 Type: 10-32 ThreadedGrade Type: PerformanceJacket Material: ThermoplasticKit Contents: Shifter CableLength: 6Length (ft): 6Length (In): 72Material: Long lay thermoplastic jacket and spiral wound steel strand inner cablepart type: Automatic Transmission Shifter CableProduct Type: Shifter CableShifter Model: pre 81′ B&M shiftersSub Category: Transmission Hard PartsWarning: California Proposition 65